Manufacturers of Inprocess Gauging Systems for Cylindrical Grinders, Flat Type and Round Type LVDT based Gauges and Gauging Systems, Support Caliper Frames, Electronic Controllers, Solenoid for Retract Operation of Wheel Head
Manufacturers of Inprocess Gauging Systems for Cylindrical Grinders, Flat Type and Round Type LVDT based Gauges and Gauging Systems, Support Caliper Frames, Electronic Controllers, Solenoid for Retract Operation of Wheel Head
Manufacturers of Inprocess Gauging Systems for Cylindrical Grinders, Flat Type and Round Type LVDT based Gauges and Gauging Systems, Support Caliper Frames, Electronic Controllers, Solenoid for Retract Operation of Wheel Head

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Products

Electronic Controllers Rear View
For General Cylindrical External Grinding with Round LVDT.
 Mounting Frame Model BMF1
Support Caliper Frame Round Type BSFR 25 (5 to 25 job Dia )
001 060 01 4
Support Caliper Frame Round Type BSFR 60 (10 to 60 job Dia )
001 061 01 3
Support Caliper Frame Round Type BSFR 100 (50 to 100 job Dia )
 001 062 01 3
Support Caliper Frame Round Type BSFR 150 (100 to 150 job Dia )
001 063 01 2
 
For Cylindrical Recess Grinding with Flat LVDT.
 Mounting Frame Model BMF2
Support Caliper Frame Flat Type BSFF 100 (for 20 to 100 job Dia )
001 140 01 2
Support Caliper Frame Flat Type BSFF 150 (50 to 150 job Dia )
001 141 01 2
Support Caliper Frame Flat Type BSFF 200 (100 to 200 job Dia )
 001 155 01 3
 
Specifications :
Electronic Controller Type :
SBIG 101A
Electronic & Control
Supply Voltage :
230 VAC ± 10% 50 Hz.
Display :
Moving Coil Meter
Resolution
For Range 50 to - 10 Microns Better than 2 Microns.
For Range 500 to 50 Microns Better than 20 Microns.
Feed changes over contacts
Coarse to fine feed :
Settable from min 250 to 70 microns
Fine Feed To Spark out :
Set table from 70 to 0 microns appox.
Rapid retraction of out :
At Zero micron
Zero Adjustment Range :
Electrically Adjustable within 300 microns via multi turn potentiometer
Repeat Accuracy :
± 2 microns.
Outputs :
Potential Free one change - over contact for each of the three limits.
Output contact Rating 2 A 250 VAC Resistive (Max)
Physical & Environmental
Physical Dimensions :
(H) 140mm X (W) 235 mm X (D)350 mm
Weight :
4.8 Kgs. Approx .
Operating Temperature :
100 to 600 C
Humidity :
93% at 350 C (non condensing)
Mounting Frame :
Assy. Type BMF1 & BMF2
Electronic Gauge :
LVDT Based
 

Designed by : MID  Hosted by : PBD  Promoted by : GID